Está en: » Artículos »

Enjaular a un usuario conectado por ssh

Enjaular a un usuario conectado por ssh

Hay un proyecto actualizado y bastante interesante:
Página principal del proyecto: http://olivier.sessink.nl/jailkit/
Pequeño how-to para debian: http://www.esdebian.org/wiki/enjaulado-facil-jailkit-chroot
Recomiendo encarecidamente utilizar este proyecto por estar más actualizado.

En determinadas ocasiones, necesitamos permitir el acceso de determinados usuarios (en los que normalmente no se confía) a nuestro servidor.

En dichas ocasiones, no queremos que pongan en peligro la seguridad del sistema, así como tampoco que puedan acceder a determinadas cosas ajenas a ellos.

Como la confianza de que no toquen ni vean nada es nula, necesitamos enjaular al usuario y evitaremos dichos problemas.

Pero ¿qué es enjaular?

Básicamente se refiere a mantener al usuario/servicio dentro de un unos límites y que sólo pueda acceder a lo que esté dentro.

Un hosting compartido suele tener cientos de dominios albergados, pero cuando se accede al mismo mediante ftp, sólo podemos ver nuestros archivos. Esto es porque el administrador del mismo, activó el método de enjaulado para el demonio ftp del mismo.

Bueno, ya que tenemos claro qué es enjaular y para qué nos puede ser de utilidad, pasaremos a explicar como realizar dicho proceso para el demonio ssh.

El demonio ssh tiene un archivo de configuración (normalmente /etc/ssh/sshd_config en los sistemas GNU/Linux). Pero el caso es que no es tan sencillo como establecer un parámetro (por lo menos en mis casos). Al enjaular al usuario en un su home, no tiene acceso al intérprete bash, otros comandos, librerías y demás necesarios para su login.Podemos copiar todos los comandos (o mejor hacer enlaces duros), establecer una serie de permisos y demás, o por facilidad, podemos utilizar un script del señor Wolfgang Fuschlberger licenciado bajo GNU General Public License versión 2 que adjunto al continuación (y al final como archivo descargable).

#!/bin/sh
#
# (c) Copyright by Wolfgang Fuschlberger
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#    ( http://www.fsf.org/licenses/gpl.txt )
#####################################################################

# first Release: 2004-07-30
RELEASE="2007-10-19"
#
# The latest version of the script is available at
#   http://www.fuschlberger.net/programs/ssh-scp-sftp-chroot-jail/
#
# Feedback is welcome!
#
# Thanks for Bugfixes / Enhancements to
# Michael Prokop ,
# Randy K., Randy D., Jonathan Hunter and everybody else.
#####################################################################

#
# Features:
# - enable scp and sftp in the chroot-jail
# - use one directory (default /home/jail/) as chroot for all users
# - create new accounts
# - move existing accounts to chroot
#####################################################################

# path to sshd's config file: needed for automatic detection of the locaten of
# the sftp-server binary
SSHD_CONFIG="/etc/ssh/sshd_config"

# Check if we are called with username or update
if [ -z "$1" ] ; then
  echo
  echo "ERROR: Parameter missing. Did you forget the username?"
  echo "-------------------------------------------------------------"
  echo
  echo "USAGE:"
  echo "Create new chrooted account or"
  echo "add existing User to chroot-jail:"
  echo "-> $0 username"
  echo
  echo "or specify $SHELL and path where the jail should be located:"
  echo "-> $0 username [/path/to/chroot-shell [/path/to/jail]]"
  echo "Default shell       = /bin/chroot-shell"
  echo "Default chroot-path = /home/jail"
  echo "-------------------------------------------------------------"
  echo
  echo "Updating files in the chroot-jail:"
  echo "-> $0 update [/path/to/chroot-shell [/path/to/jail]]"
  echo "-------------------------------------------------------------"
  echo
  echo "To uninstall:"
  echo " # userdel $USER"
  echo " # rm -rf /home/jail"
  echo " (this deletes all Users' files!)"
  echo " # rm -f /bin/chroot-shell"
  echo " manually delete the User's line from /etc/sudoers"
  exit
fi

if [ -z "$PATH" ] ; then
  PATH=/bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin
fi

echo
echo Release: $RELEASE
echo

echo "Am I root?  "
if [ "$(whoami &2>/dev/null)" != "root" ] && [ "$(id -un &2>/dev/null)" != "root" ] ; then
  echo "  NO!

Error: You must be root to run this script."
  exit 1
fi
echo "  OK";

# Check existence of necessary files
echo "Checking distribution... "
if [ -f /etc/debian_version ];
  then echo "  Supported Distribution found"
       echo "  System is running Debian Linux"
       DISTRO=DEBIAN;
elif [ -f /etc/SuSE-release ];
  then echo "  Supported Distribution found"
       echo "  System is running SuSE Linux"
       DISTRO=SUSE;
elif [ -f /etc/fedora-release ];
  then echo "  Supported Distribution found"
       echo "  System is running Fedora Linux"
       DISTRO=FEDORA;
elif [ -f /etc/redhat-release ];
  then echo "  Supported Distribution found"
       echo "  System is running Red Hat Linux"
       DISTRO=REDHAT;
else echo -e "  failed...........nThis script works best on Debian, Red Hat, Fedora and SuSE Linux!nLet's try it nevertheless....nIf some program files cannot be found adjust the respective path in line 98n"
#exit 1
fi

# Specify the apps you want to copy to the jail
if [ "$DISTRO" = SUSE ]; then
  APPS="/bin/bash /bin/cp /usr/bin/dircolors /bin/ls /bin/mkdir /bin/mv /bin/rm /bin/rmdir /bin/sh /bin/su /usr/bin/groups /usr/bin/id /usr/bin/netcat /usr/bin/rsync /usr/bin/ssh /usr/bin/scp /sbin/unix_chkpwd"
elif [ "$DISTRO" = FEDORA ]; then
  APPS="/bin/bash /bin/cp /usr/bin/dircolors /bin/ls /bin/mkdir /bin/mv /bin/rm /bin/rmdir /bin/sh /bin/su /usr/bin/groups /usr/bin/id /usr/bin/nc /usr/bin/rsync /usr/bin/ssh /usr/bin/scp /sbin/unix_chkpwd"
elif [ "$DISTRO" = REDHAT ]; then
  APPS="/bin/bash /bin/cp /usr/bin/dircolors /bin/ls /bin/mkdir /bin/mv /bin/rm /bin/rmdir /bin/sh /bin/su /usr/bin/groups /usr/bin/id /usr/bin/nc /usr/bin/rsync /usr/bin/ssh /usr/bin/scp /sbin/unix_chkpwd"
elif [ "$DISTRO" = DEBIAN ]; then
  APPS="/bin/bash /bin/cp /usr/bin/dircolors /bin/ls /bin/mkdir /bin/mv /bin/rm /bin/rmdir /bin/sh /bin/su /usr/bin/groups /usr/bin/id /usr/bin/rsync /usr/bin/ssh /usr/bin/scp /sbin/unix_chkpwd"
else
  APPS="/bin/bash /bin/cp /usr/bin/dircolors /bin/ls /bin/mkdir /bin/mv /bin/rm /bin/rmdir /bin/sh /bin/su /usr/bin/groups /usr/bin/id /usr/bin/rsync /usr/bin/ssh /usr/bin/scp /usr/sbin/unix_chkpwd"
fi

# Check existence of necessary files
echo "Checking for which... "
#if [ -f $(which which) ] ;
# not good because if which does not exist I look for an
# empty filename and get OK nevertheless
if ( test -f /usr/bin/which ) || ( test -f /bin/which ) || ( test -f /sbin/which ) || ( test -f /usr/sbin/which );
  then echo "  OK";
  else echo "  failed

Please install which-binary!
"
exit 1
fi

echo "Checking for chroot..."
if [ `which chroot` ];
  then echo "  OK";
  else echo "  failed

chroot not found!
Please install chroot-package/binary!
"
exit 1
fi

echo "Checking for sudo..."
if [ `which sudo` ]; then
  echo "  OK";
else
  echo "  failed

sudo not found!
Please install sudo-package/binary!
"
exit 1
fi

echo "Checking for dirname..."
if [ `which dirname` ]; then
  echo "  OK";
else
  echo "  failed

dirname not found!
Please install dirname-binary (to be found eg in the package coreutils)!
"
exit 1
fi

echo "Checking for awk..."
if [ `which awk` ]; then
  echo "  OK
";
else
  echo "  failed

awk not found!
Please install (g)awk-package/binary!
"
exit 1
fi

# get location of sftp-server binary from /etc/ssh/sshd_config
# check for existence of /etc/ssh/sshd_config and for
# (uncommented) line with sftp-server filename. If neither exists, just skip
# this step and continue without sftp-server
#
#if  (test ! -f /etc/ssh/sshd_config &> /dev/null); then
#  echo "
#File /etc/ssh/sshd_config not found.
#Not checking for path to sftp-server.
#  ";
#else
if [ ! -f ${SSHD_CONFIG} ]
then
   echo "File ${SSHD_CONFIG} not found."
   echo "Not checking for path to sftp-server."
   echo "Please adjust the global $SSHD_CONFIG variable"
else
  if !(grep -v "^#" ${SSHD_CONFIG} | grep -i sftp-server &> /dev/null); then
    echo "Obviously no sftp-server is running on this system.
";
  else SFTP_SERVER=$(grep -v "^#" ${SSHD_CONFIG} | grep -i sftp-server | awk  '{ print $3}')
  fi
fi

#if !(grep -v "^#" /etc/ssh/sshd_config | grep -i sftp-server /etc/ssh/sshd_config | awk  '{ print $3}' &> /dev/null); then
APPS="$APPS $SFTP_SERVER"

# Get accountname to create / move
CHROOT_USERNAME=$1

if ! [ -z "$2" ] ; then
  SHELL=$2
else
  SHELL=/bin/chroot-shell
fi

if ! [ -z "$3" ] ; then
  JAILPATH=$3
else
  JAILPATH=/home/jail
fi

# Exit if user already exists
#id $CHROOT_USERNAME > /dev/null 2>&1 && { echo "User exists."; echo "Exiting."; exit 1; }

# Check if user already exists and ask for confirmation
# we have to trust that root knows what she is doing when saying 'yes'
if ( id $CHROOT_USERNAME > /dev/null 2>&1 ) ; then {
echo "
-----------------------------
User $CHROOT_USERNAME exists. 

Are you sure you want to modify the users home directory and lock him into the
chroot directory?
Are you REALLY sure?
Say only yes if you absolutely know what you are doing!"
  read -p "(yes/no) -> " MODIFYUSER
  if [ "$MODIFYUSER" != "yes" ]; then
    echo "
Not entered yes. Exiting...."
    exit 1
  fi
}
else
  CREATEUSER="yes"
fi

# Create $SHELL (shell for jailed accounts)
if [ -f ${SHELL} ] ; then
  echo "
-----------------------------
The file $SHELL exists.
Probably it was created by this script.

Are you sure you want to overwrite it?
(you want to say yes for example if you are running the script for the second
time when adding more than one account to the jail)"
read -p "(yes/no) -> " OVERWRITE
if [ "$OVERWRITE" != "yes" ]; then
  echo "
Not entered yes. Exiting...."
  exit 1
fi
else
  echo "Creating $SHELL"
  echo '#!/bin/sh' > $SHELL
  echo "`which sudo` `which chroot` $JAILPATH /bin/su - $USER" "$@" >> $SHELL
  chmod 755 $SHELL
fi

# make common jail for everybody if inexistent
if [ ! -d ${JAILPATH} ] ; then
  mkdir -p ${JAILPATH}
  echo "Creating ${JAILPATH}"
fi
cd ${JAILPATH}

# Create directories in jail that do not exist yet
JAILDIRS="dev etc etc/pam.d bin home sbin usr usr/bin usr/lib"
for directory in $JAILDIRS ; do
  if [ ! -d "$JAILPATH/$directory" ] ; then
    mkdir $JAILPATH/"$directory"
    echo "Creating $JAILPATH/$directory"
  fi
done
echo

# Comment in the following lines if your apache can't read the directories and
# uses the security contexts
# Fix security contexts so Apache can read files
#CHCON=$(`which chcon`)
#if [ -n "$CHCON" ] && [ -x $CHCON ]; then
#    $CHCON -t home_root_t $JAILPATH/home
#    $CHCON -t user_home_dir_t $JAILPATH/home/$CHROOT_USERNAME
#fi

# Creating necessary devices
[ -r $JAILPATH/dev/urandom ] || mknod $JAILPATH/dev/urandom c 1 9
[ -r $JAILPATH/dev/null ]    || mknod -m 666 $JAILPATH/dev/null    c 1 3
[ -r $JAILPATH/dev/zero ]    || mknod -m 666 $JAILPATH/dev/zero    c 1 5
[ -r $JAILPATH/dev/tty ]     || mknod -m 666 $JAILPATH/dev/tty     c 5 0 

# if we only want to update the files in the jail
# skip the creation of the new account
if [ "$1" != "update" ]; then

# Modifiy /etc/sudoers to enable chroot-ing for users
# must be removed by hand if account is deleted
echo "Modifying /etc/sudoers"
echo "$CHROOT_USERNAME       ALL=NOPASSWD: `which chroot`, /bin/su - $CHROOT_USERNAME" >> /etc/sudoers

# Define HomeDir for simple referencing
HOMEDIR="$JAILPATH/home/$CHROOT_USERNAME"

# Create new account, setting $SHELL to the above created script and
# $HOME to $JAILPATH/home/*
if [ "$CREATEUSER" != "yes" ] ; then echo "
Not creating new User account
Modifying User "$CHROOT_USERNAME"
Copying files in $CHROOT_USERNAME's $HOME to "$HOMEDIR"
"
usermod -d "$HOMEDIR" -m -s "$SHELL" $CHROOT_USERNAME && chmod 700 "$HOMEDIR"
fi

if [ "$CREATEUSER" = "yes" ] ; then {
echo "Adding User "$CHROOT_USERNAME" to system"
useradd -m -d "$HOMEDIR" -s "$SHELL" $CHROOT_USERNAME && chmod 700 "$HOMEDIR"

# Enter password for new account
if !(passwd $CHROOT_USERNAME);
  then echo "Passwords are probably not the same, try again."
  exit 1;
fi
echo
}
fi

# Create /usr/bin/groups in the jail
echo "#!/bin/bash" > usr/bin/groups
echo "id -Gn" >> usr/bin/groups
chmod 755 usr/bin/groups

# Add users to etc/passwd
#
# check if file exists (ie we are not called for the first time)
# if yes skip root's entry and do not overwrite the file
if [ ! -f etc/passwd ] ; then
 grep /etc/passwd -e "^root" > ${JAILPATH}/etc/passwd
fi
if [ ! -f etc/group ] ; then
 grep /etc/group -e "^root" > ${JAILPATH}/etc/group
# add the group for all users to etc/group (otherwise there is a nasty error
# message and probably because of that changing directories doesn't work with
# winSCP)
 grep /etc/group -e "^users" >> ${JAILPATH}/etc/group
fi

# grep the username which was given to us from /etc/passwd and add it
# to ./etc/passwd replacing the $HOME with the directory as it will then
# appear in the jail
echo "Adding User $CHROOT_USERNAME to jail"
grep -e "^$CHROOT_USERNAME:" /etc/passwd | 
 sed -e "s#$JAILPATH##"      
     -e "s#$SHELL#/bin/bash#"  >> ${JAILPATH}/etc/passwd

# if the system uses one account/one group we write the
# account's group to etc/group
grep -e "^$CHROOT_USERNAME:" /etc/group >> ${JAILPATH}/etc/group

# write the user's line from /etc/shadow to /home/jail/etc/shadow
grep -e "^$CHROOT_USERNAME:" /etc/shadow >> ${JAILPATH}/etc/shadow
chmod 600 ${JAILPATH}/etc/shadow

# endif for =! update
fi

# Copy the apps and the related libs
echo "Copying necessary library-files to jail (may take some time)"

# The original code worked fine on RedHat 7.3, but did not on FC3.
# On FC3, when the 'ldd' is done, there is a 'linux-gate.so.1' that
# points to nothing (or a 90xb.....), and it also does not pick up
# some files that start with a '/'. To fix this, I am doing the ldd
# to a file called ldlist, then going back into the file and pulling
# out the libs that start with '/'
#
# Randy K.
#
# The original code worked fine on 2.4 kernel systems. Kernel 2.6
# introduced an internal library called 'linux-gate.so.1'. This
# 'phantom' library caused non-critical errors to display during the
# copy since the file does not actually exist on the file system.
# To fix re-direct output of ldd to a file, parse the file and get
# library files that start with /
#

# create temporary files with mktemp, if that doesn't work for some reason use
# the old method with $HOME/ldlist[2] (so I don't have to check the existence
# of the mktemp package / binary at the beginning
#
TMPFILE1=`mktemp` &> /dev/null ||  TMPFILE1="${HOME}/ldlist"; if [ -x ${TMPFILE1} ]; then mv ${TMPFILE1} ${TMPFILE1}.bak;fi
TMPFILE2=`mktemp` &> /dev/null ||  TMPFILE2="${HOME}/ldlist2"; if [ -x ${TMPFILE2} ]; then mv ${TMPFILE2} ${TMPFILE2}.bak;fi

for app in $APPS;  do
    # First of all, check that this application exists
    if [ -x $app ]; then
        # Check that the directory exists; create it if not.
#        app_path=`echo $app | sed -e 's#(.+)/[^/]+#1#'`
        app_path=`dirname $app`
        if ! [ -d .$app_path ]; then
            mkdir -p .$app_path
        fi

		# If the files in the chroot are on the same file system as the
		# original files you should be able to use hard links instead of
		# copying the files, too. Symbolic links cannot be used, because the
		# original files are outside the chroot.
		cp -p $app .$app

        # get list of necessary libraries
        ldd $app >> ${TMPFILE1}
    fi
done

# Clear out any old temporary file before we start
for libs in `cat ${TMPFILE1}`; do
   frst_char="`echo $libs | cut -c1`"
   if [ "$frst_char" = "/" ]; then
     echo "$libs" >> ${TMPFILE2}
   fi
done
for lib in `cat ${TMPFILE2}`; do
    mkdir -p .`dirname $lib` > /dev/null 2>&1

	# If the files in the chroot are on the same file system as the original
	# files you should be able to use hard links instead of copying the files,
	# too. Symbolic links cannot be used, because the original files are
	# outside the chroot.
    cp $lib .$lib
done

#
# Now, cleanup the 2 files we created for the library list
#
#/bin/rm -f ${HOME}/ldlist
#/bin/rm -f ${HOME}/ldlist2
/bin/rm -f ${TMPFILE1}
/bin/rm -f ${TMPFILE2}

# Necessary files that are not listed by ldd.
#
# There might be errors because of files that do not exist but in the end it
# may work nevertheless (I added new file names at the end without deleting old
# ones for reasons of backward compatibility).
# So please test ssh/scp before reporting a bug.
if [ "$DISTRO" = SUSE ]; then
  cp /lib/libnss_compat.so.2 /lib/libnss_files.so.2 /lib/libnss_dns.so.2 /lib/libxcrypt.so.1 ${JAILPATH}/lib/
elif [ "$DISTRO" = FEDORA ]; then
  cp /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_files.so.2 /lib/ld-linux.so.2 /lib/ld-ldb.so.3 /lib/ld-lsb.so.3 /lib/libnss_dns.so.2 /lib/libxcrypt.so.1 ${JAILPATH}/lib/
  cp /lib/*.* ${JAILPATH}/lib/
  cp /usr/lib/libcrack.so.2 ${JAILPATH}/usr/lib/
elif [ "$DISTRO" = REDHAT ]; then
  cp /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_files.so.2 /lib/ld-linux.so.2 /lib/ld-lsb.so.1 /lib/libnss_dns.so.2 /lib/libxcrypt.so.1 ${JAILPATH}/lib/
  # needed for scp on RHEL
  echo "export LD_LIBRARY_PATH=/usr/kerberos/lib" >> ${JAILPATH}/etc/profile
elif [ "$DISTRO" = DEBIAN ]; then
  cp /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_files.so.2 /lib/libcap.so.1 /lib/libnss_dns.so.2 ${JAILPATH}/lib/
else
  cp /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_files.so.2 /lib/libcap.so.1 /lib/libnss_dns.so.2 ${JAILPATH}/lib/
fi

# if you are using a 64 bit system and have strange problems with login comment
# the following lines in, perhaps it works then (motto: if you can't find the
# needed library just copy all of them)
#
#cp /lib/*.* ${JAILPATH}/lib/
#cp /lib/lib64/*.* ${JAILPATH}/lib/lib64/ 

# if you are using PAM you need stuff from /etc/pam.d/ in the jail,
echo "Copying files from /etc/pam.d/ to jail"
cp /etc/pam.d/* ${JAILPATH}/etc/pam.d/

# ...and of course the PAM-modules...
echo "Copying PAM-Modules to jail"
cp -r /lib/security ${JAILPATH}/lib/

# ...and something else useful for PAM
cp -r /etc/security ${JAILPATH}/etc/
cp /etc/login.defs ${JAILPATH}/etc/

if [ -f /etc/DIR_COLORS ] ; then
  cp /etc/DIR_COLORS ${JAILPATH}/etc/
fi 

# Don't give more permissions than necessary
chown root.root ${JAILPATH}/bin/su
chmod 700 ${JAILPATH}/bin/su

exit

El uso del script es sencillo:

  • Añadir usuario enjaulado: ./make_chroot_jail.sh nombre_usuario
  • Añadir usuario enjaulado con opciones: ./make_chroot_jail.sh nombre_usuario [/ruta/a/shell/enjaulada [/ruta/al/home/enjaulado]]
  • Actualizar usuario enjaulado: ./make_chroot_jail.sh update nombre_usuario [/ruta/a/shell/enjaulada [/ruta/al/home/enjaulado]]
  • Eliminar usuario: (hay que hacerlo manualmente)
  • userdel nombre_usuario
  • rm -rf /ruta/al/home/enjaulado
  • rm -f /bin/chroot-shell (con esto eliminamos el intérprete de enjaulado. No lo ejecutes si tienes otros usuarios enjaulados)
  • eliminar manualmente las líneas de usuario de /etc/sudoers

Espero que les sea de utilidad

Archivo: make_chroot_jail.sh (renombrar de .txt a .sh y dar permisos de ejecución)

Comentarios

  1. Anónimo dice:

    Seria posible a un usaurio creado con este script el que tambien pueda utilizar el mysql

    ¿como puedo añadirle comandos?

    Una gran ayuda y buen apunte de tu blog.

  2. Sí es posible
    Básicamente el script lo que hace es crear un entorno chroot en un directorio (por defecto /home/jail/) y ahí copia los comandos que pueda ejecutar. Para tu propósito, deberías copiar los binarios necesarios a bin, y las dependencias a su respectivos lugares (como las librerías por ejemplo).

    Puedes comprobar las dependencias con el gestor de paquetes, o puedes copiar el binario que necesites, lanzarlo e ir comprobando sus dependencias para copiarlas tambien.

    Saludos y ánimo

  3. Boreas dice:

    Muy bueno, es justo lo que necesitaba. Lo he probado y funciona 100%. La siguiente cuestion que me surge es si es posible limitar el espacio en disco que un determinado usuario tiene. ¿alguna idea?

  4. h2non dice:

    Puedes hacerlo habilitando el sistema de quotas. Pero para ello tendras que hacerlo al compilar el kernel, asi que si ya tienes el sistema funcionando, dudo que puedas hacerlo. Suerte!

  5. Efectivamente y como dice h2hon, la mejor opción es habilitar las cuotas en el sistema.
    La mayoría de distribuciones populares compilan el kernel con soporte para cuotas y google tiene buena información al respecto.
    En openSuse, es tan sencillo como ir al particionador (dentro de yast), editar la partición a la que queramos agregar la cuota y en las opciones, marcar el uso de cuotas.

    Saludos

  6. Mortenol dice:

    Estupendo!!!!

    Después de probar con 1000 tutoriales, el tuyo me ha funcionado correctamente.

    Yo queria esto para dar acceso a los logs de una aplicacion a un desarrollador. Pero claro, cuando le creo un enlace a su jaula, no puede visualizarlo.

    Como lo puedo hacer?

  7. Gerson dice:

    amigo no puedo hacer SFTP me puedes ayudar, pero si SSH, que tengo que hacer gracias de antemano

  8. Leí esta guía sobre la parte servidor de SFTP, y he aprendido de un montón de tutoriales como este. He aquí mi compendio para configurar mejor clientes y servidores:

    http://wiki.lapipaplena.org/index.php/Como_montar_accesos_SFTP

    (con especial cuidado sobre usuarios y permisos)

  9. Gerson dice:

    El scrip me funciona excelente en debian 5.0 pero no me funciona en red hat enterprise 5.0 que puedo hacer gracias.

    El problema es el siguiente creo un usuario me conecto via ssh y puedo entrar hacer login, pero cuando ejecuto el scrip para ese usuario ya no puedo hacer ssh.

  10. @Mortenol Establece la ruta a los logs como el home del usuario.

  11. gonsso dice:

    He seguido tu manual y me ha funcionado bien. Pero me encuentro un problema, basicamente lo quiero para que entre un usuario y lanze un ping o un traceroute a una ip para pruebas. He copiado el binario del ping pero al ejecutarlo me dice:
    -bash-3.1$ ping x.x.x.x
    Using fallback suid method
    ping: permission denied. (are you root?)

    ¿como lo puedo solucionar?
    Gracias por adelantado

  12. jagalzap dice:

    Hola Valide el proceso pero al tratar de ingresar con el usuario que estoy enjaulado no me deja ni por ssh ni por sftp, si saben que puede estar pasando y me pueden ayudar mil gracias.

  13. Gerardo Santos dice:

    Podrías realizar un ejemplo práctico con estos Datos:
    Cuenta: ptllog
    Path de jail:/repptllog/sftp

    Gracias.-

Deje su comentario

Previsualización de comentario
  1. Anónimo dice:





Pings para esta entrada

  1. […] Link Like this:LikeBe the first to like this post. […]